====== Zach Smith ======
  * Role: Contributor
  * E-mail: [[hoeken@gmail.com]]
  * Website: [[http://rrrf.org]]
  * Contact: 

===== Projects =====
  * [[http://www.zachhoeken.com/danger-shield-v1-0|Danger Shield]] - [[http://www.nycresistor.com/2008/04/21/zach-smith-demos-his-danger-shield/]]
  * [[http://makerbot.com/|MakerBot stuff]]

Zach's email:
<code>
> Hey Mitch,
>
> Lets see:  there is the Danger Shield project which covers linear
> trimpots, leds, piezo buzzers, temp sensors, light sensors, and
> 7-segment displays with a dash of shift registers.  On the MakerBot
> front, we could do all sorts of fun stuff from dc motors to stepper
> motors to heaters to temperature control to serial comms to rs485.
> I'm cool with either of those, so just let me know which one fits best
> and we can narrow in on the particulars.
>
> Cheers,
> Zach
</code>

<del>No response?</del>

Zach is really bad with answering emails.  But I talked to him on the phone and he says he is way into being a contributor -- Mitch.

===== Jeff's Notes =====
As of 4/22 Zach will most likely not be contributor to the book, since he works almost entirely with Reprap/Arduino instead of AVRs.  I emailed him on 4/16 to thank him for his suggestions so far.  No further emails are required.
